Small encyclopedia from A to Z

On the Gegeseite one applies, to the protection against one forgives; no high-quality veneers

visible veneers on chip boards, tischler-platten; Edelfurniere

Saw out from curving, figuerliches sawing out

Leaves saw

Veneer is a thin wood sheet of 0,1 to 3 mm of thickness. After the production method measurers become -, peeling and sawing veneer differentiated. Differentiated according to the type of use lock off -, deck -, counter and Unterfurnier.

For inside and lower surfaces; On the opposite side one applies, one forgives to the protection against; no high-quality veneers

Intarsien (Mz.) is inserting work, with which different colour one wood or andersgeartedes one material (sign flat, perlmutter, metal, alabaster, glass) is inserted into recesses worked out from the solid wood. Another technology is presenting one from multi colour or different material on the wood core (Marketerie).

Of the sapwood the circularly surrounded and itself by an often darker colouring internal part taking off of the trunk.

Inserting work, with graphic representations or ornamentations from veneer sheets or other material (sign flat, metal, etc..) to samples or pictures to be built up and as a whole on a surface area be up-glued.

Maser is a diseased cancer-like tuber stature at trunk and root.

Design (texture) of the wood

Messerfurniere are manufactured on measurer machines. The wood blocks are absorbed before, in order to make it supple for the subsequent treatment. Over the halved wood block moves horizontal the knife
and plane-like the veneer takes off.

The term pommelé originates from France, and is called geapfelt. It designates a veneer with weichgerandeten marks.

Typical design of the veneer, which was made of a forked stick.

Ripple stature, short-wave fiber direction, which arrange a marvelous wave effect for the cut surface.

A sheet sawing veneer is separated with a block belt saw from the wood block. Veneers from noble woods are sawed.

The veneers are manufactured on Rundschaelmaschienen. A wood block is first absorbed and then as in a turning lathe clamped and against the knife turned. The knife peels spiral a veneer volume.

The trunks of all trees contain sapwood. The portion depends on the kind, the age and the growth conditions. With most kinds it is an about 3 to 5 cm broad coat of lightcolored wood, which includes the heartwood. Sapwood is sensitive for mushroom and insect attack.

(also blind veneer) after that veneers not more visible lower wood surface; to the protection against cracking; crosswise or diagonally to the cover veneer one applies; no high-quality veneers